Adjusting removable footboard – Invacare IIBASIC User Manual

Page 24

Advertising
background image

24

Replacing

NOTE: Observe the position of the current telescoping
front rigging support before removal to ensure correct
position of new support assembly.

1. Remove the existing telescoping front rigging sup-

port from the wheelchair.

2. Install the new telescoping front rigging support into

the wheelchair.

3. Adjust the telescoping front rigging support. Refer to

ADJUSTING TELESCOPING FRONT RIGGING
SUPPORT in this procedure of the manual.

ADJUSTING REMOVABLE
FOOTBOARD

Depth - All Models (FIGURE 8)

1. Remove the four (4) flat head screws and barrel nuts

that secure the removable footboard to the two (2)
footplate clamps.

F

R

O

N

T

R

I

G
G

I

N

G

S

FRONT RIGGINGS

PROCEDURE 3

Footplate

Clamps

Removable

Footboard

FIGURE 8 - ADJUSTING FLIP-UP

REMOVABLE FOOTBOARD - DEPTH

Mounting

Positions

Flat Head Screws

Barrel Nut

Barrel Nut

2. Move the removable footboard to one (1) of the four (4)

positions.

NOTE: Before reinstalling the four (4) flat head screws,
make sure the footplate clamps are in the proper position
as shown in DETAIL "A".

3. Reinstall the four (4) flat head screws and barrel nuts

that secure the removable footboard to the two (2)
footplate clamps. Tighten securely.

Angle

ADJUSTING FOOTBOARD ANGLE - ALL
MODELS (FIGURE 9).

1. Loosen, but do not remove, the four (4) flat head screws

and barrel nuts that secure the removable footboard
to the two (2) footplate clamps.

NOTE: Because of the two (2) support tubes, the angle
of the removable footboard can be adjusted down-
ward ONLY.

2. Grasp the front of the removable footboard and ro-

tate it DOWNWARD until the desired angle is
reached.

3. While holding the removable footboard in place,

tighten the four (4) flat head screws and barrel nuts
securely.

FIGURE 9 - ADJUSTING FLIP-UP

REMOVABLE FOOTBOARD - ADJUSTING

FOOTBOARD ANGLE

Removable

Footboard

Barrel Nut

Flat

Head

Screw

Angle Can Be Adjusted

Downward ONLY

FRONT

Footplate

Clamp

DETAIL "A"

Proper

Footplate

Clamp

Position for

MWD

Wheelchairs

Proper

Footplate

Clamp

Position for

FWD

Wheelchairs

Advertising
This manual is related to the following products: