Invacare IIBASIC - Manual (Page 46)

46
9. Install the battery box(es) into the wheelchair. Refer
to INSTALLING/REMOVING BATTERY BOX(ES) in
the PROCEDURE 11 - FWD MODELS or PROCE-
DURE 12 - MWD MODELS of this manual.
NOTE: New Battery(ies) MUST be fully charged BEFORE
using, otherwise the life of the battery(ies) will be reduced.
10. If necessary, charge the battery(ies). Refer to
CHARGING BATTERIES in the PROCEDURE 11 -
FWD MODELS or PROCEDURE 12 - MWD MOD-
ELS of this manual.
DETAIL “A”
DETAIL “B”
NOTE: Battery clamps exploded away for clarification purposes only.
Mounting Plate
FIGURE 6 - CONNECTING BATTERY CABLES - BATTERY CLAMP METHOD
CONNECTING BATTERY CABLE(S) TO BATTERY(IES) TERMINAL(S)/POST(S)
9. Install the battery box(es) into the wheelchair. Refer
to INSTALLING/REMOVING BATTERY BOX(ES) in
the PROCEDURE 11 - FWD MODELS or PROCE-
DURE 12 - MWD MODELS of this manual.
NOTE: New Battery(ies) MUST be fully charged BEFORE
using, otherwise the life of the battery(ies) will be reduced.
10. If necessary, charge the battery(ies). Refer to
CHARGING BATTERIES in the PROCEDURE 11 -
FWD MODELS or PROCEDURE 12 - MWD MOD-
ELS of this manual.
CONNECTING BATTERY CABLE(S) TO BATTERY(IES) TERMINAL(S)/POST(S)
PROCEDURE 10 BATTERIES
B
A
T
T
E
R
I
E
S
Hex Screw
Negative (-) BLACK
Battery Cable
Positive (+) RED
Battery Cable
Battery Clamp
POSITIVE (+) Battery Terminal/Post
and Battery Clamp
NEGATIVE (-) Battery Terminal/
Post and Battery Clamp
Positive (+) RED
Battery Cable
Negative (-) BLACK
Battery Cable
Group 22NF Battery
POSITIVE (+) Battery
Terminal/Post
Mounting Plate
Group 22NF Battery
NEGATIVE (-) Battery Terminal/Post
TOP VIEW
EXPLODED
VIEW
RED Battery Clamp Cover
NEGATIVE (-) Battery
Terminal/Post
Tie-Wrap
BLACK Battery Clamp Cover Group 22NF Battery
Tie-Wrap
POSITIVE (+) Battery
Terminal/Post
Fuse Box placement
when box top
is installed
Fuse Box