Invacare IIBASIC - Manual (Page 26)

26
PREPARING REMOVABLE
FOOTBOARD FOR WHEELCHAIR
TRANSPORTATION (FIGURE 12)
Removing The Removable Footboard Plate
1. Depress the push pins on the two (2) support tubes
on the removable footboard plate.
2. While performing STEP 1, grasp the removable
footboard plate and pull it away from the two (2) sup-
port tubes on the removable footboard mounting
brackets.
FIGURE 12 - PREPARING REMOVABLE FOOTBOARD
FOR WHEELCHAIR TRANSPORTATION
Push
Pin
Support Tube
Removable
Footboard Plate
Support
Tube
Removable
Footboard
Mounting
Bracket
Adjustment
Hole
NOTE: Bottom view of wheelchair/footboard shown
for clarity.
Pull Removable
Footboard Plate Away
Installing The Removable Footboard Plate
1. Align the two (2) support tubes on the removable
footboard plate with the two (2) support tubes on the
removable footboard mounting brackets.
2. Push the two (2) support tubes on the removable
footboard plate onto the two (2) support tubes on
the removable footboard mounting brackets, until
the push pins release into the adjustment holes.
WARNING
Make sure the push pins are fully protruding through
the adjustment holes BEFORE using the wheelchair.
Otherwise, injury or damage can occur.
3. Make sure the push pins are completely released.
F
R
O
N
T
R
I
G
G
I
N
G
S
FRONT RIGGINGS PROCEDURE 3
Caplug
Cap
Mounting
Screw
Caplug
Washer
Flat
Washer
Nut Height Adjustment
Bracket
Footboard
Bracket
Two (2) Large
Washers
Support Tube
DETAIL “A”
DETAIL “B”
FIGURE 11 - ADJUSTING THE
REMOVABLE FOOTBOARD HEIGHT
Footboard Bracket
Nut Flat
Washer
Mounting
Positions
Threaded
Arm
Height
Adjustment
Bracket
NOTE: Only MWD footboard bracket shown for clar-
ity. The footboard bracket on the FWD model adjusts
in the same manner.