IBM ISERIES SC41-5210-04 User Manual
Page 228
1. On the command line of the OS/400 Main Menu, type the DSPOBJD command as shown on the
following display and press the Enter key. This creates the file named
QRYFILE and puts it in the
library QGPL.
Note: When you type
*ALL for the OBJTYPE parameter, you must include a space after *ALL or you
will receive an error message. You must type in the entire command exactly as it appears on
the display that follows.
MAIN
OS/400 Main Menu
System:
RCH38342
Select one of the following:
1. User tasks
2. Office tasks
3. General systemtasks
4. Files, libraries, and folders
5. Programming
6. Communications
7. Define or change the system
8. Problemhandling
9. Display a menu
90. Sign off
Selection or command
===> DSPOBJD OBJ(QGPL/*ALL) OBJTYPE(*ALL ) OUTPUT(*OUTFILE) OUTFILE(QGPL/QRYFIL
E)
F3=Exit
F4=Prompt
F9=Retrieve
F12=Cancel
F13=User support
F23=Set initial menu
(C) COPYRIGHT IBM CORP. 1980, 1991.
2. Type
WRKQRY on the command line and press the Enter key.
MAIN
OS/400 Main Menu
System:
RCH38342
Select one of the following:
1. User tasks
2. Office tasks
3. General systemtasks
4. Files, libraries, and folders
5. Programming
6. Communications
7. Define or change the system
8. Problemhandling
9. Display a menu
90. Sign off
Selection or command
===> WRKQRY
F3=Exit
F4=Prompt
F9=Retrieve
F12=Cancel
F13=User support
F23=Set initial menu
3. The Work with Queries display is shown. On this display, choose option 1 (Create). Then name your
query by typing a name in the Query prompt, and specify the library where your query will be stored
by typing a name in the Library prompt. Press the Enter key.
216
Query for iSeries Use V5R2