IBM ISERIES SC41-5210-04 - Manual (Page 238)

Define Report Breaks
Type break level (1-6) for up to 9 field names, press Enter.
(Use as many fields as needed for each break level.)
Break Sort
Level Prty Field Text Len Dec
ODLBNM LIBRARY 10
1 10 ODOBTP OBJECT TYPE 8
ODOBAT OBJECT ATTRIBUTE 10
20 ODOBSZ OBJECT SIZE 10 0
ODOBTX TEXT DESCRIPTION 50
Bottom
F3=Exit F5=Report F10=Process/previous F11=Display names only
F12=Cancel F13=Layout F18=Files F23=Long comment
Press the Enter key.
13. On the next display, Format Report Break, you specify the formatting you want for the report break
you defined. Note that the value in the Break level prompt is zero. You can use break level 0 to print
the final summary values for all specified summary functions at the end of the report. For this
example, do not change anything on this display. Just press the Enter key.
Format Report Break
Break level . . . . . . . : 0
Type choices, press Enter.
(Type &field in text to have break values inserted.)
Suppress summaries . . . . N Y=Yes, N=No
Break text . . . . . . . . FINAL TOTALS
Level Field
1 ODOBTP
F3=Exit F5=Report F10=Process/previous F12=Cancel
F13=Layout F18=Files F23=Long comment
On the next display you see that the Break level prompt has been filled in with a 1. Here you format
the report break for break level 1. In the Break text prompt, type in
Break text for object type. This
text will occur in the report every time a report break occurs for this break level.
226 Query for iSeries Use V5R2