Intel iEi Motherboard A300 - Manual (Page 122)

A300 Motherboard
Use the PCI Latency Timer option to specify the PCI latency time. The latency time is
measured in units of PCI clock cycles for the PCI device latency timer register.
Configuration options are:
32
64 D EFAULT
96
128
160
192
224
248
Allocate IRQ to PCI VGA [Yes]
Use the Allocate IRQ to PCI VGA option to restrict the system from giving the VGA
adapter card an interrupt address.
Yes (Default) Assigns an IRQ to a PCI VGA card if card requests IRQ
No Does not assign IRQ to a PCI VGA card even if the card
requests an IRQ
Palette Snooping [Disabled]
Use the Palette Snooping option to enable or disable the palette snooping function.
Disabled D EFAULT Unless the VGA card manufacturer requires palette
snooping to be enabled, this option should be
disabled.
No/Enabled PCI devices are informed that an ISA based
Graphics device is installed in the system so the ISA
based Graphics card functions correctly. This does
not necessarily indicate a physical ISA adapter card.
Page 107