Intermec NORAND 600 - Manual (Page 15)

SECTION 1 General Information
NORAND R 600 Series Industrial Mobile Computer User’s Guide 1-9
Table 1-1 (continued)
Gold Legend Keypad Functions
Gold + Result Icon
6 Pg Dn Page Down
DEL . (period)
7
A
Left arrow
8 B Down arrow
9
" Right arrow
ESC Alt
0 Ctrl (control)
Enter End
ON/OFF (Suspend and Resume)
Key
In order to conserve power your Industrial Mobile
Computer may automatically suspend when there has been
no activity for a set period of time. The suspend time can be
programmed through the setup parameters for your
computer.
To force a suspend, press the [I/O] key, or a key that may be
defined as the suspend key, and hold the key down for three
seconds. To resume operation, press the [I/O] key.
Serial Port
Your computer can access serial devices through the dock’s
RS-232 serial port, using one of these accessories:
"
A serial cable plugs into and latches to the docking
connector and provides a standard PC compatible
DB-9 (male) serial port.
"
A data sychronous cable plugs into and latches to the
docking connector and provides a DB-9 (female) which
can be plugged into a standard PC serial port.