Intermec NORAND 600 - Manual (Page 19)

NORAND R 600 Series Industrial Mobile Computer User’s Guide 2-1
Section 2
Operation
" " " " " " " " " " " " " " " " " " " " " " " " " " " "
This section tells you how to:
"
Charge the battery
"
“Power-up” your 600 Series Industrial Mobile
Computer
"
Install CompactFlash cards
Getting Started
Unpack your 600 Series Industrial Mobile Computer and
inspect it for signs of physical damage from shipment or
storage.
When you start using your computer or any time that all
power has been completely removed, you are “cold booting”
it. The method you use depends on your application.
For example you may download the application and data
into your computer. Or, you may use CompactFlash cards to
load the application and data.
Depending on the method you are using, the result will be
the same but the steps you go through may vary from the
way this user’s guide presents the material.