Intel IQ80333 User Manual
Page 22
22
Customer Reference Board Manual
Getting Started
To bring up a HyperTerminal session on a Win32 platform: Go to Start, Programs, Accessories,
Communications, HyperTerminal
•
HyperTerminal setup screens:
— “Connection Description” Panel:
•
Enter name.
— “Connect To” Panel:
•
Select host com2 port (or whichever port you are using).
— Port Settings:
•
Bits per second: 115200
•
Data Bits: 8
•
Parity: none
•
Stop Bits: 1
•
Flow Control: none
— Start HyperTerminal:
•
Select Call from HyperTerminal panel.
— Reset or power up IQ80333.
— The Host screen reads:
For further information on the GDB/Insight Debugger, refer to the content of the GNUPro CD and/or
the GNUPro Debugging Tools manual. This setup assumes that RedBoot is Flashed on the board.
RedBoot(tm) debug environment - built dd:mm:yy, Mon dd 2004
Platform: 80333
Copyright (C) 2004, RedHat, Inc.
RAM: 0xa0000000-0xa2000000
FLASH: 0x00000000 - 0x00800000, 64 blocks of 0x00020000 bytes each.
IP: 192.168.0.1, Default server: 0.0.0.0
RedBoot>