Iiyama L403W - Manual (Page 22)

ENGLISH
n Method by using Ch Up / Down button
n Method by using number button
<Program number 1-9>
You can select the channel you set up on program number by pressing the number button.
<Program number 10-99>
--is displayed on the screen by pressing button.
Enter the program number you want to select by pressing the number button.
(e.g. Program number 15)
A E
SELECTION OF TV CHANNEL
To select a TV channel, pick the program number you want on Channel Set-up.
You can select channels in numerical order by pressing Ch Up button on the remote control or Up button on the monitor in TV input.
You can select channels in reverse by pressing Ch Down button on the remote control or Down button on the monitor.
You can select only the program number which you set the SKIP function”Off”. NOTE
n Switch the input signal
This is switched when you successively press the Input Button on the
monitor as follows:
PC (ANALOG)
PC (DIGITAL)
TV
AV-1
AV-2
[ Monitor ] Press the Input Button.
[ Remote Control ] Press the Input Signal
Select Button.
n Display the adjustment menu page
The menu page appears on the screen when you press the MENU Button on the monitor
or the Remote Control.
The menu page disappears when you press the Menu Button on the Remote Control
again.
[ Monitor ] Press the MENU Button.
[ Remote Control ] Press the MENU Button.
The MENU Button on the monitor is also used to confirm a selected menu item or setting. NOTE
This is switched when you successively press
the button as follows:
n TV: TV is ON.
n VIDEO:
AV1 AV2
n PC: PC Analog PC Digital
20 APPENDIX B