Intermec F4 - Manual (Page 20)

Intermec EasyCoder F4 – Installation & Operation IPL Version, Ed. 3 19
Chapter 4
Open the side door.
Turn the printhead lift lever clockwise to raise
the printhead.
Media Load
Tear-Off
(Straight-through) The EasyCoder F4 can print on labels, tickets, tags, and continuous
stock in various forms. This chapter describes the case when the
media is to be torn off manually against the printer’s tear bar. This
method is also known as “straight-through printing”.
Tear-off can be used for:
• Non-adhesive continuous stock
• Self-adhesive continuous stock with liner
• Self-adhesive labels with liner
• Tickets with gaps, with or without perforations
• Tickets with black marks, with or without perforations
1 2
Important!
Save the label indicating the
sensitivity number attached to
the media roll. You will need
this number to set the media
sensitivity, see Appendix 2.