IBM Switch 9077 - Manual (Page 295)

GRF Configuration Files 277
DEFAULTS
hold=2
local=y
size=10000
logfile=/var/log/grclean.log
B.9 /etc/grdev1.conf
This file normally gets updated automatically by the SNMP daemon running
on the CWS.
############################################################################
# DEV1 Configuration
###########################################################################
#
# There are several variables that an SP Adapter card needs at start up.
# These are handled by a set of GRINCHES whose descriptors are indexed
# by card number and interface number as follows:
#
# 2.21.{CARD+1}.1.{INTERFACE+1}
#
# This template specifies the start-up values for all potential cards
# in a 16-card GRF router. Initially these are default values indicating
# that the card needs to be configured.
#
# The descriptors are grouped by card and interface so that a particular
# interface can be easily configured.
#
############################################################################
#
# CARD 0 Interface 0
#
2.21.1.1.1.1 "00" # Node Name
2.21.1.1.1.2 -1 # Node Number
2.21.1.1.1.3 "00:00:00:00:00:00:00:00:00:00" # Switch Token
2.21.1.1.1.4 2 # Switch ARP
2.21.1.1.1.5 0 # Switch Node Number
2.21.1.1.1.6 x0.0.0.0 # IP Address
2.21.1.1.1.7 x0.0.0.0 # Net Mask
2.21.1.1.1.8 1024 # Max Link Pckt Len.(bytes)
2.21.1.1.1.9 0 # IP Host Offset
2.21.1.1.1.10 1 # Configuration State
2.21.1.1.1.11 "no name" # System Name
2.21.1.1.1.12 2 # Node State
2.21.1.1.1.13 0 # Switch Chip Link
2.21.1.1.1.14 64 # Node Delay (cycles)
2.21.1.1.1.15 1 # Admin Status
#
# CARD 1 Interface 0
#
2.21.2.1.1.1 "01" # Node Name
2.21.2.1.1.2 -1 # Node Number
2.21.2.1.1.3 "00:00:00:00:00:00:00:00:00:00" # Switch Token
2.21.2.1.1.4 2 # Switch ARP
2.21.2.1.1.5 0 # Switch Node Number
2.21.2.1.1.6 x0.0.0.0 # IP Address
2.21.2.1.1.7 x0.0.0.0 # Net Mask
2.21.2.1.1.8 1024 # Max Link Pckt Len.(bytes)
2.21.2.1.1.9 0 # IP Host Offset
2.21.2.1.1.10 1 # Configuration State
2.21.2.1.1.11 "no name" # System Name