Insignia NS-HDTUNE - Manual (Page 16)

14
NS-HDTUNE
www.insignia-products.com
3 Push the battery bracket into the battery
compartment until it clicks into place.
Connecting the power cord
To connect the power cord:
• Plug the power cord into a power outlet.
Notes
• If the remote control only works within a
short distance from your radio, replace
the battery.
• If you do not plan to use the remote
control for an extended period of time or
if you plan to store the remote control,
remove the battery.
• When you replace the battery, make
sure that you use a battery of the same
type and voltage. The battery is a
CR2025 3 V battery.
• Dispose of used batteries by following
your local hazardous waste regulations.
Power cord