Insignia NS-HDTUNE - Manual (Page 20)

18
NS-HDTUNE
www.insignia-products.com
To connect to a sound system using a
standard audio cable:
1
Make sure that your radio and the sound system are
turned off and the power cords are unplugged.
2 Connect one end of a standard AV audio cable to the
LINE OUT jacks on the back of your radio.
3 Connect the other end of the cable to the LINE IN or
AV AUDIO IN jacks on a sound system.
4 Reconnect the power cables, then turn on your radio
and the sound system.
5 Select the audio input on your sound system that
matches the audio output jack you connected your
radio to.
Standard AV
audio cable