Using your radio, Turning on your radio, Selecting the tuning band – Insignia NS-HDTUNE User Manual
Page 21: Tuning to a station
NS-HDTUNE
19
www.insignia-products.com
Using your radio
Turning on your radio
To turn on your radio:
1
Make sure that the POWER ON/OFF switch on the
back of your radio is in the ON position.
2
Press
(power) on the front of your radio or remote
control.
3
To put your radio in standby mode, press
(power)
again.
Selecting the tuning band
To select the tuning band:
•
Press AM/FM on the front of your radio or on the
remote control to select AM, FM1, or FM2. The
band you selected appears on the LCD.
Tuning to a station
To tune to a station:
•
Press SEEK on the front of your radio or remote
control. Your radio searches for the next clear
analog or HD station.
•
Press HD SEEK on the front of your radio or
remote control. Your radio searches for the next
clear HD station.