Insignia NS-HDTUNE - Manual (Page 18)

16
NS-HDTUNE
www.insignia-products.com
Connecting to a sound system
You can connect your radio to a sound system using a
coaxial audio, optical, or standard audio cable.
To connect to a sound system using a
coaxial audio cable:
1
Make sure that your radio and the sound system are
turned off and the power cords are unplugged.
2 Connect one end of a coaxial audio cable to the
COAXIAL jack on the back of your radio.
3 Connect the other end of the cable to the COAXIAL
IN jack on a sound system.
4 Reconnect the power cables, then turn on your radio
and the sound system.
5 Select the audio input on your sound system that
matches the audio output jack you connected your
radio to.
Coaxial audio
cable