Insignia NS-HDTUNE - Manual (Page 17)

NS-HDTUNE
15 www.insignia-products.com
Connecting the antennas
To connect the antennas:
1
Connect the FM antenna to the FM connector on the
back of your radio, then connect the AM antenna to
the AM connector on the back of your radio.
2 Fully extend the antenna wires. You may need to
adjust the antennas to get the best reception.
Turning on power
Your radio has a POWER ON/OFF switch on the back.
The
Power button on the front of your radio and on the
remote control puts your radio in standby mode, but they
do not turn off power.
To turn on power:
• After you connect the power cord, slide the
POWER ON/OFF switch to the ON position.
FM antenna AM antenna