Icom IC-F7000 - Manual (Page 4)

1 - 1
SECTION 1 SPECIFICATIONS
All stated specifications are subject to change without notice or obligation.
• IC-F7000
‘ ‘ GENERAL
• Frequency coverage : Receive 500 kHz–29.9999 MHz
• Mode : J3E (USB/LSB), *J2B (AFSK), *F1B (FSK), *A1A (CW), A3E
*[OTH] version only
• Antenna impedance : 50
Ω
• Frequency stability : ±50 Hz
• Power supply requirement : 13.8 V (10.8 V–15.6 V) DC Negative ground
• Current drain (at 13.8 V DC) : RX; 3.0 A at Max. audio power
TX; 23 A at Max. output output
• Usable temperature range : –10˚C to +60˚C; –14˚F to +140˚F
• Dimensions (projections not included) : 240(W)
×
72(H)
×
239(D) mm; 9 7 ⁄ 16 (W)
×
2 27 ⁄ 32 (H)
×
9 13 ⁄ 32 (D) in.
• Weight : Approx. 4.6 kg; 10 lb 2.26 oz
‘ ‘ TRANSMITTER
• Output power : 1.6–29.9999 MHz 100, 50, 10 W PEP [AUS]
1.6–3.9999 MHz 125, 50, 10 W PEP [OTH]
4.0–29.9999 MHz 100, 50, 10 W PEP [OTH]
• Spurious emissions : Less than –43 dB at peak output power (Maximum power)
• Carrier suppression : Less than 40 dB at peak output power (Maximum power)
• Unwanted sideband suppression : Less than 50 dB at peak output power (Maximum power)
with 1500 Hz AF input
• Microphone impedance : 600
Ω
‘ ‘ RECEIVER
• Sensitivity :
(Pre-amplifier is ON)
• Squelch sensitivity :
• Spurious response rejection : More than 70 dB 1.6–29.9999 MHz
• AF output power : 4 W at 4
Ω
load with 10% distortion
• Clarity variable range : ±150 Hz
MODE
J3E
A3E
FREQUENCY
0.5–1.5999 MHz
1.6–29.9999 MHz
0.5–1.5999 MHz
20 dB SINAD
28 dBµV emf
0 dBµV emf
46 dBµV emf
10 dB S/N
14 dBµV
–14 dBµV
32 dBµV
MODE
J3E at 13.800 MHz
A3E at 1.000 MHz
Threshold
Less than +20 dBµV
Less than +30 dBµV
Tight
Less than +90 dBµV
Less than +110 dBµV
Spec (MHz) No Spec (MHz)
1.6–5.4999 5.5–5.7299
5.73–5.9999 6.0–6.6999
6.7–8.0999 8.1–9.999
Transmit 10.0–11.1999 11.2–13.3999
13.4–14.9999 15.0–17.9999
18.0–18.9999 19.0–19.9999
20.0–20.9999 21.0–22.9999
23.0–27.9999 28.0–29.9999