Intel IM-Q35 Series - Manual (Page 47)

3-8
IM-Q35 Mainboard
IDE Configuration
SATA#1 Configuration
This item allows you to configurare IDE device mode.
[Compatible] If Compatible selected, Legacy IDE Channels will be presented
for configuration.
[Enhanced] If Enhanced selected, ”Configure SATA as” will be presented for
setup.
Configure SATA#1 as s
This setting specifies the function of the on-chip SATA controller.
Primary/Secondary/Third/Fourth/Fifth IDE Master/Slave
[Type] Press PgUp/<+> or PgDn/<-> to select
[Manual], [None] or [Auto] type. Note that the
PDF created with pdfFactory Pro trial version www.pdffactory.com