IBM C2B 2.25 Brick On Sled carrier 128-pin HPC User Manual

Page 43

Advertising
background image

USER RESPONSIBLE F O R V E R I F Y I N G VERSION A N D COMPLETENESS

O E M F U N C T I O N A L SPECIFICATION ULTRASTAR X P (DFHC) SSA M O D E L S 1.12/2.25 GB - 1.0" H I G H

3.3.2.1 Theoretical Data Sector Transfer Rate

This Rate does not account for time required for error recovery or defective sectors (the Typical Data Sector
Transfer Rate described in 3.3.1, “Basic Component Descriptions” on page 40 does include those effects).
Each group of cylinders with a different number of gross sectors per track is called a notch. The following
shows values for notch #1 of C4x models. The "Average" values used in this specification are sums of the
individual notch values weighted by the number of LBAs in the associated notches. For the other notches
and block lengths use values that correspond to those notches and block lengths.

Data Sector Transfer Rate

=

Bytes/cylinder

time for 1 cyl + track skews + 1 cyl skew

Bytes/cylinder

= {(tracks/cyl)(gross sectors/track) - spares/cyl}(user bytes/sector)
= {(16)(135) - 40}(512)
= 1,085,440 Bytes/cyl

time for 1 cyl of data

= {(tracks/cyl)(gross sectors/track) - spares/cyl}(avg. sector time)
= {(16)(135) - 40}(.061705)
= 130.815 msec/cyl

time for track skews

= (tracks/cyl - 1)(track skew)(avg. sector time)
= (16-1)(13)(.061700)
= 12.032 msec/cyl

time for 1 cyl skew

= (cylinder skew)(avg. sector time)
= (25)(.061705)
= 1.543 msec/cyl

Data Sector Transfer Rate

=

1,085,440 Bytes

130.815 msec + 12.032 msec + 1.543 msec

= 7.517 MB/sec (Notch #1)

Note: See 2.0, “Specifications” on page 11 for the descriptions of

tracks/cyl (trk/cyl)
gross sectors/track (gs/trk)
spares/cyl (b1spr/cyl and b2spr/cyl)
user bytes/sector (ub/sct)
gross bytes/sector (gb/sct)

See 3.5, “Skew” on page 46 for the descriptions of

track skew (tss)
cylinder skew (css)

Average sector times per notch can be calculated as follows:

average sector time (ast) =

1 sec

120.045 × gs/trk

3.4 Approximating Performance for Different Environments

Source filename=PERFORM

IBM Corporation

Page 43 of 87

Advertising