IBM C2B 2.25 Brick On Sled carrier 128-pin HPC - Manual (Page 76)

USER RESPONSIBLE F O R V E R I F Y I N G VERSION A N D COMPLETENESS
O E M F U N C T I O N A L SPECIFICATION ULTRASTAR X P (DFHC) SSA M O D E L S 1.12/2.25 GB - 1.0" H I G H
Install Defect Free percentage 99.99 percent
6.10 Periodic Maintenance
None required
6.11 ESD Protection
The Ultrastar XP SSA disk drives contain electrical components sensitive to damage due to electrostatic
discharge (ESD). Proper ESD procedures must be followed during handling, installation, and removal. This
includes the use of ESD wrist straps and ESD protective shipping containers.
6.12 Connector Insertion Cycles
Live insertion and removal of the electrical connector causes pitting on the connector terminals. Because of
this the number of live insertion and removal cycles must be limited.
Maximum Insertion/Removal Cycles (for hot and normal insertion) 25
Source filename=POH IBM Corporation Page 76 of 87