IBM H SERIES RS/6000 - Manual (Page 282)

removing a hot-swap disk drive 5-12
reserved status 7-31, 7-39
reset Service Processor 3-11
restart recovery 3-22, 3-26
RETAIN 3-21
retries 3-21
ring indicator power-on
3-12
ROM (read-only memory) 7-56
ROS (read-only storage) 7-55, 7-56
rules for SSA loops 7-27
running the online diagnostics in con-
current mode 6-11
running the online diagnostics in main-
tenance mode 6-11
running the online diagnostics in
service mode 6-9
running the standalone
diagnostics 6-12
S
safety considerations 5-2
safety notices xi
seamless transfer of a modem
session C-6
select, function menu 7-31
send diagnostic command 10-1
sequence, startup 4-8
serial number 7-27
service aids
available 7-54
Certify Disk
7-45
Configuration Verification 7-41
Format Disk 7-43
link failure 7-47
Link Verification 7-38
Set Service Mode 7-33
starting SSA 7-31
unavailable 7-54
vital product data (VPD)
7-56
service center 3-19
service processor
service processor checklist
B-1
checklist B-1
service processor menus
accessing locally 3-3
accessing remotely 3-3
call-in/call-out 3-16
call-out policy
3-20
customer account 3-21
general user 3-4
language selection 3-15
menu inactivity 3-3
privileged user 3-6
reboot policy 3-22
restart policy 3-22
serial port selection 3-17
serial port speed setup 3-18
setup menu 3-8
supported menu options 3-2
system information 3-13
system power control 3-12
telephone number 3-18
service processor setup B-1
service processor setup checklist B-1
service processor test B-1
service provider 3-19
Set Service Mode service aid 7-33
sp checklist B-1
sp installation
checklist B-1
SP operational phases D-1
sp setup B-1
sp test B-1
SSA (serial storage architecture)
adapter 7-25, 7-56
address (AA) value
7-54
inactive connector 7-26
link
active 7-26
X-6 RS/6000 Enterprise Server Model H Series User's Guide