IBM H SERIES RS/6000 - Manual (Page 36)

Using the Hot Swap Disk Drives
For information on installing SSA or SCSI hot swap drives refer to “Installing Disk
Drives into the Hot-Swap Bays” on page 5-6.
Relationship of AIX Prompts and Physical Drive Location
A SCSI adapter and a SCSI drive address can be displayed on a user display. The
AIX command lscfg list the attached devices on the system display. A SCSI adapter
and drives might be listed as:
Labels on the right side of each bank, identify the PCI Bus indicator and PCI Slot
address for the SCSI adapter attached to each bank.
See “AIX and Physical Location Code Reference Table Model 50” on page 6-18 or
“AIX and Physical Location Code Reference Table Model 70” on page 6-25 for more
details.
Physical Slot of SCSI Adapter Model 50 Bank Label Model 70 Bank Label
9P (Model 50 only) 30-78
8P 30-70 30-70
7P 30-68 30-68
6P 30-60 40-60
5P 10-78 40-78
4P 10-70 10-70
3P 10-68 10-68
2P 20-60 20-60
1P 20-58 20-58
Second Integrated SCSI Controller 30-58 10-88
First Integrated SCSI Controller 10-60 10-60
2-16 RS/6000 Enterprise Server Model H Series User's Guide