Ice-O-Matic ICE0250 Series - Manual (Page 53)

ICE Series Water System
Page D5
Water Trough
The water trough can be easily removed by the following procedures:
Mounting Screws
ICEU150/200 Models
1. Disconnect power to the ice machine.
2. Shut the water supply off to the ice machine.
3. Remove water splash curtains when
applicable.
4. Remove water trough mounting screws.
5. Carefully remove water trough from the ice
machine.
6. Reverse procedure to reassemble.
ICE 22 Inch Wide Models
Mounting Screws ICE 30 Inch Wide Models
ICE 48 Inch Wide Models
Mounting Screws
Mounting Screws
Mounting Screws
Mounting Screws
Version 3 Water
Trough
ICE1506 Model
ICEU300