IBM MICROPORTABLE ILM300 - Manual (Page 31)

This item is useful if you have varied screen sizings in the same presentation. Select 16:9 to activate the
16:9 ratio using the Effect button.
Service menu
Use the choices on this menu to perform maintenance functions. The Service Code is reserved for trained
technicians only.
From the Basic menu, select Setup → Service.
Factory Rese t
Use Factory Reset to automatically return all settings to the factory default values.
Info
Select Info to display further information about projector settings.
Reset Lamptimer
Select this option when you change the projector lamp. The Lamp timer shows how many hours a lamp
has been used. See “Replacing the projection lamp” on page 27.
Service Code
Chapter 2. Using the projector 21