IBM 3590 - Manual (Page 51)

Operator Menus
Operator menus are available at the successful completion of the power-on
self-test (POST).
Options Menu
Table 6 shows the Options menu.
Table 6. Options
Function Next Menu
Start/Allow Load
(Model C12/C14
only)
—
Set ACF Mode... “Set ACF Mode Menu” on page 32
Unload Drive —
Services... “Services Menu” on page 33
Note: Supplemental Message Line 1: <none> Supplemental Message Line 2: <none>
Start Enables the ACF on Models E11 or B11. This function cannot be
selected on Models E1A or B1A.
Allow Load
Allows loading cartridges when the 3590 Model C12 or C14 is in
manual mode.
Set ACF Mode
Sets the ACF mode for Models E11 and B11.
Unload Drive
Causes the device to rewind and to unload the cartridge in the device.
Services
Allows the operator to perform configuration tasks, such as setting the
SCSI online and offline.
Chapter 3. Drive Operator Panel and Controls 31