IBM 3590 - Manual (Page 60)

Fibre Address Menu
Table 15 shows the Fibre Address menu.
Table 15. Set Address
Function Next Menu
Cancel “Services Menu” on page 33
Show Node Names “Show Node Name Menu”
Show Port Names “Show Port Names Menu” on page 41
Set Port 0... “Set Port 0 Fibre Address Menu” on page 42
Set Port 1... “Set Port 1 Fibre Address Menu” on page 43
Cancel Causes the “Services Menu” on page 33 to
appear.
Show Node Name Causes the “Show Node Name Menu” to
appear.
Show Port Names Causes the “Show Port Names Menu” on
page 41 to appear.
Set Port 0 Causes the “Set Port 0 Fibre Address Menu”
on page 42 to appear.
Set Port 1 Causes the “Set Port 1 Fibre Address Menu”
on page 43 to appear.
Show Node Name Menu
Table 16 shows the Show Node Name menu.
Table 16. Show Node Name
Function Next Menu
Cancel “Fibre Address Menu”
Node Name
0123456789ABCDEF
(16 character #)
“Fibre Address Menu”
Cancel Selecting this function causes the “Set Address Menu” on
page 37 to appear.
Node Name 0123456789ABCDEF The number that appears is a unique
address for the logical unit in the drive. The address uses the
World Wide ID convention which is a sixteen character
number.
40 3590 Operator Guide