Integra DTR-8.8 - Manual (Page 124)

124
Zone 2 and Zone 3
In addition to your main listening room, you can also enjoy playback in two other rooms, or as we call them, Zone 2
and Zone 3. And, you can select a different source for each room.
There are two ways you can connect Zone 2 speakers:
1. Connect them directly to the AV receiver.
2. Connect them to an amp in Zone 2.
Connecting Your Zone 2 Speakers Directly
to the AV receiver
This setup allows 5.1-channel playback in your main
room and 2-channel stereo playback in Zone 2, with a
different source in each room. This is called Powered
Zone 2, as the Zone 2 speakers are powered by the AV
receiver. Note that when Powered Zone 2 is turned off,
you can enjoy 7.1-channel playback in your main room.
Hookup
• Connect your Zone 2 speakers to the AV receiver’s
ZONE 2 L/R speaker terminals.
Note:
• With this setup, the Zone 2 volume is controlled by the
AV receiver.
Connecting Your Zone 2 Speakers to an
Amp in Zone 2
This setup allows 7.1-channel playback in your main lis-
tening room and 2-channel stereo playback in Zone 2,
with a different source in each room.
Hookup
• Use an RCA audio cable to connect the AV receiver’s
ZONE 2 PRE OUT L/R jacks to an analog audio input
on your Zone 2 amp.
• Use an RCA audio cable to connect the AV receiver’s
ZONE 2 PRE OUT SW jack to the line input on a
powered subwoofer in Zone 2.
• Connect your Zone 2 speakers to the speaker termi-
nals on your Zone 2 amp.
Note:
• With the default settings, the Zone 2 volume must be
set on the Zone 2 amp. If your Zone 2 amp has no vol-
ume control, set the Zone 2 Out setting to Variable so
that you can set the Zone 2 volume on the AV receiver
(see page 127).
Connecting Zone 2
FRONT L (BTL) FRONT R (BTL)
V
S
MONITOR OUT ZONE 2 OUT
RS232
DIGITAL COAXIAL
OPTICAL
REMOTE
CONTROL
IN 1
IN 1
IN 2 IN IN IN IN
PHONO ZONE2 L FRONT R FRONT L SURR R CENTER SURR L SURR BACK R CD TAPE AUX 1 GAME/TV
GAME/TV CBL/SAT
CBL/SAT
AUX 1 VCR/DVR
VCR/DVR DVD
DVD
GND IN 2
IN 3 L L
R R
ASSIGNABLE (DVD)
(CBL/SAT)
(VCR/DVR)
(GAME/TV)
(CD) OUT
OUT IN IN OUT IN IN FRONT FRONT CENTER
SUBWOOFER SUBWOOFER
CENTER SURR SURR
MULTI CH PRE OUT
SURR BACK SURR BACK
AC INLET
Bi-AMP SURR BACK L Bi-AMP
ETHERNET
HDMI IN 1 IN 2 IN 3 IN 4 ASSIGNABLE OUT MAIN OUT SUB
ZONE2 R
AM ANTENNA FM75 COMPONENT VIDEO ASSIGNABLE IN 3 Y
CB/PB
CR/PR
IN 2 IN 1(DVD) MONITOR OUT 1 MONITOR OUT 2 /ZONE 2 OUT
V
S ZONE 2 ZONE 3
PRE OUT
L
R
SW A B
IR
12V TRIGGER OUT
B
OUT
C
ZONE2 R ZONE2 L
L R
Main room
TV
Zone 2
AV receiver
You must set the Powered Zone 2 setting to Act
(Activated) to use this setup (see page 126).
FRONT L (BTL) FRONT R (BTL)
V
S
MONITOR OUT ZONE 2 OUT
RS232
DIGITAL COAXIAL
OPTICAL
REMOTE
CONTROL
IN 1
IN 1
IN 2 IN IN IN IN
PHONO ZONE2 L FRONT R FRONT L SURR R CENTER SURR L SURR BACK R CD TAPE AUX 1 GAME/TV
GAME/TV CBL/SAT
CBL/SAT
AUX 1 VCR/DVR
VCR/DVR DVD
DVD
GND IN 2
IN 3 L L
R R
ASSIGNABLE (DVD)
(CBL/SAT)
(VCR/DVR)
(GAME/TV)
(CD) OUT
OUT IN IN OUT IN IN FRONT FRONT CENTER
SUBWOOFER SUBWOOFER
CENTER SURR SURR
MULTI CH PRE OUT
SURR BACK SURR BACK
AC INLET
Bi-AMP SURR BACK L Bi-AMP
ETHERNET
HDMI IN 1 IN 2 IN 3 IN 4 ASSIGNABLE OUT MAIN OUT SUB
ZONE2 R
AM ANTENNA FM75 COMPONENT VIDEO ASSIGNABLE IN 3 Y
CB/PB
CR/PR
IN 2 IN 1(DVD) MONITOR OUT 1 MONITOR OUT 2 /ZONE 2 OUT
V
S ZONE 2 ZONE 3
PRE OUT
L
R
SW A B
IR
12V TRIGGER OUT
B
OUT
C
R L
IN
LINE INPUT
ZONE 2 ZONE 3
PRE OUT
L
R
SW
Main room
Zone 2
Receiver/
integrated amp
AV receiver
Powered
subwoofer
TV