Integra DTR-8.8 - Manual (Page 88)

88
Using the Listening Modes
For a description of each listening mode, see “About the
Listening Modes” on page 93.
Selecting on the AV Receiver
■
[Stereo] button
This button selects the Stereo listening mode.
■ Listening Mode [ ]/[ ] buttons
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
Selecting with the Remote Controller
■ [Stereo] button
This button selects the Stereo listening mode.
■ [Surround] button
This button selects the Dolby Digital and DTS listen-
ing modes.
■ Listening Mode [ ]/[ ] buttons
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
■
[Direct] button
This button selects the Direct listening mode.
■ [THX] button
This button selects the THX listening modes.
■
[All ST] button
This button selects the All Channel Stereo listening
mode.
Selecting the Listening Modes
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial, optical, or HDMI).
• The listening modes you can select depends
on the format of the input signal. To check
the format, see “Displaying Source Informa-
tion” on page 84.
• While a pair of headphones is connected,
you can only select the Mono, Direct, or Ste-
reo listening mode.
Stereo
Listening Mode
VOL
CH
Disc
Album
+
-
Enter
Top
Men u Men
u
Display Muting
Exi t Gu ide
Prev
CH Ret urn Setu
p
RC- 688M
Audio Repeat Play Mode
Open/Close
Listening Mode
DVD HDD
Playlist Random Rec
Test Tone CH Sel
Direct
Stereo
Level+ Level-
L Night Audio Sel
THX All ST
Re-EQ
Subtitle
Video Off
VCR
Surround
,
Stereo
Direct THX
All ST
Surround