Which connections should i use, Connecting audio and video signals to, The avreceiver – Integra DTR-8.8 User Manual

Page 30: Connecting your components —continued

Advertising
background image

30

Connecting Your Components

—Continued

By connecting both the audio and video outputs of your DVD player and other AV components to the AV receiver, you
can switch the audio and video signals simultaneously simply by changing the input source on the AV receiver.

The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format
you choose will depend on the formats supported by your other components. Use the following sections as a guide.

For video components, you must make an audio connection and a video connection.

Video Connection Formats

Video equipment can be connected to the AV receiver by using any one of the following video connection formats:
composite video, S-Video, component video, or HDMI, the latter offering the best picture quality.

The AV receiver can upconvert and downconvert between video formats, depending on the HDMI Monitor setting,
which generally determines whether video signals are upconverted for the component video output or the HDMI output.

For optimal video performance, THX recommends that video signals pass through the system without upconver-
sion (e.g., component video input through to component video output). It’s also recommended that you set the
Immediate Display preference to Off (page 112).

HDMI Monitor Setting Set to Main or Sub

With the HDMI Monitor setting set to Main or
Sub (see page 48), video input signals flow
through the AV receiver as shown, with com-
posite video, S-Video, and component video
sources all being upconverted for the HDMI
output.

Use the Main or Sub setting if you

connect the AV receiver’s HDMI OUT
MAIN or HDMI OUT SUB, respectively, to
your TV.

The composite video, S-Video, and component
video outputs pass through their respective
input signals as they are.

Connecting Audio and Video Signals to the AV Receiver

: Signal Flow

Video

Video

Audio

Speakers (see page 23 for hookup details)

DVD player, etc.

TV, projector,

etc.

Audio

Which Connections Should I Use?

IN

MONITOR OUT

DVD player, etc.

AV receiver

TV, projector, etc.

Composite

S-Video

Component

Video Signal Flow Chart

HDMI

Composite

S-Video

Component

HDMI

Advertising