Icom IF6061 - Manual (Page 10)

7
1
PANEL DESCRIPTION
D For Digital mode operation only
TALKGROUP KEY
Push to enter the talkgroup ID code selection mode. Then
select the desired talkgroup ID code using [CH Up]/[CH
Down]. (p. 12)
TX STATUS KEY
Push to enter the Status message selection mode. Then
select the desired Status message using [CH Up]/[CH Down].
(p. 12)
TONE/RAN CH SELECT KEY
➥ While in the analog mode operation, push to select the
continuous tone channel using [CH Up] or [CH Down] to
change the tone frequency/code setting.
➥ While in the digital mode operation, push to select the RAN
channel using [CH Up] or [CH Down] to change the RAN
code setting.
➥ While in the mixed (digital and analog) mode operation,
push to select the continuous tone channel using [CH Up]
or [CH Down] to change the tone frequency/code setting.
Then push this key to enter the setting. After that, the RAN
channel selection screen appears. Select the RAN channel
using [CH Up] or [CH Down] to change the RAN code set-
ting. Then push this key to enter the setting.
IC-F5061_F6061_0.qxd 07.4.9 0:59 PM Page 7 (1,1)