Call procedure, Receiving and transmitting – Icom IF6061 User Manual

Page 12

Advertising
background image

9

2

BASIC OPERATION

Call procedure

When your system employs tone signaling (excluding CTCSS
and DTCS), the call procedure may be necessary prior to voice
transmission. The tone signalling employed may be a selec-
tive calling system which allows you to call specific station(s)
only and prevent unwanted stations from contacting you.

q Select the desired TX code channel, 2/5-tone code or

Talkgroup ID code* according to your System Operator’s
instructions.

• This may not be necessary depending on programming.
• Refer to pgs. 10–12 for selection.
*Digital mode operation only.

w Push the call key (assigned to one of the dealer program-

mable keys; except for the Digital mode operation) or [PTT].

e After transmitting, the remainder of your communication

can be carried out in the normal fashion.

Receiving and transmitting

Receiving:
q Push [

] to turn the power ON.

w Push [CH Up] or [CH Down] to select a channel, in

sequence.

e When receiving a call, adjust the audio output level to a

comfortable listening level.

Transmitting:
Wait for the channel to become clear to avoid interference.
q Take the microphone off hook.

• 2/5-tone mute may be released. (The ‘audible’ condition is

selected and BUSY indicator lights green.)

• A priority channel may be selected automatically.

w Wait for the channel to become clear.

• The channel is busy when BUSY indicator lights green.

e Push [CALL] when initiating a call from your side.

• Coded audio may be heard from the transceiver, then “

appears.

• This operation may not be necessary depending on your signal-

ing system. Ask your dealer for details.

r While pushing and holding [PTT], speak into the micro-

phone at your normal voice level.

t Release [PTT] to receive.

IMPORTANT: To maximize the readability of your signal;

1. Pause briefly after pushing [PTT].
2. Hold the microphone 5 to 10 cm (2 to 4 inches) from

your mouth, then speak into the microphone at a normal
voice level.

Selective calling

Non-selective calling

IC-F5061_F6061_0.qxd 07.4.9 0:59 PM Page 9 (1,1)

Advertising
This manual is related to the following products: