Icom IF6061 - Manual (Page 5)

2
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■ Function display
q SIGNAL STRENGTH INDICATOR
Indicates relative signal strength level as below.
w LOW POWER INDICATOR
Appears when low output power is selected.
e AUDIBLE INDICATOR
➥ Appears when the channel is in the ‘audible’ (unmute)
condition.
➥ Appears when the specified 2/5-tone/BIIS* 1 /MDC* 2
code is received.
r COMPANDER INDICATOR
Appears when the compander function is activated.
t SCRAMBLER INDICATOR
Appears when the voice scrambler function is activated.
y BELL INDICATOR
Appears/blinks when the specific 2/5-tone/BIIS* 1 /MDC* 2
code is received, according to the pre-programming.
u CALL CODE MEMORY INDICATOR
➥ Appears when the call code memory is selected.
➥ Appears when a phone call is received.* 3
i SCROLL INDICATOR
Appears when the received SDM includes more than 12
characters.*
1
o SDM INDICATOR
Appears when an SDM is received, or a transmit SDM is
selected.*
1
!0 ALPHANUMERIC DISPLAY
➥ Displays an operating channel number, channel name,
Set mode contents, DTMF code, etc.
➥ The indication mode can be selected from 1 line or 2
lines. Ask your dealer for details.
• In this instruction manual, the LCD illustration is described
using the 2 lines indication mode.
!1 ACTIVATED KEY INDICATOR
Appears above the key assigned as [Scan A Start/Stop],
[Scan B Start/Stop], [Scan Add/Del(Tag)], [Lock], [Talk
Around], [Surveillance], [Talkgroup]*
4 and [Digital]* 1 keys
during that key is activated.
* 1 BIIS operation only * 2 MDC operation only
* 3 LTR ® operation only * 4 Digital operation only
See the operating guide for details of BIIS, MDC and LTR ®
system operations. Ask your dealer for details.
Weak ⇐ Receive Signal level ⇒ Strong
I c o m I n c .
q w e r t y u i o
!0
!1
IC-F5061_F6061_0.qxd 07.4.9 0:59 PM Page 2 (1,1)