Icom IF6061 - Manual (Page 15)

12
2
BASIC OPERATION
2
D Talkgroup ID code selection
(Digital mode operation only)
If the transceiver has [Talkgroup] assigned to it, the indication
can be toggled between the operating channel name (and the
channel number)* and the Talkgroup ID name (or ID code if
the ID name is not programmed.) When the Talkgroup ID
name (or ID code) is displayed, [CH Up] or [CH Down] selects
the desired Talkgroup ID name (or ID code).
q Push [Talkgroup]— Talkgroup ID name (or ID code)
appears.
w Push [CH Up] or [CH Down] to select the desired
Talkgroup ID name (or ID code).
e Push [PTT] to transmit the selected Talkgroup ID.
D TX Status message selection
(Digital mode operation only)
If the transceiver has [TX Status] assigned to it, the indication
can be toggled between the operating channel name (and the
channel number)* and the Status message (and the Status
channel.)* When the Status message (and the Status chan-
nel)* is displayed, [CH Up] or [CH Down] selects the desired
Status message.
q Push [TX Status]— Status message (and Status channel)*
appears.
w Push [CH Up] or [CH Down] to select the desired Status
message.
e Push [PTT] to transmit the selected Status message.
* Only when the 2 lines indication mode is selected.
S T A T U S 0 1
T X S t a t u s 0 1
When the 2 lines indication mode is selected.
Status message Status channel
T G I D 0 1
When the 2 lines indication mode is selected
and [Talkgroup] is assigned to [P0].
Talkgroup ID name
Appears above the
key that [Talkgroup]
is assinged after
pushed.
IC-F5061_F6061_0.qxd 07.4.9 0:59 PM Page 12 (1,1)