Configure vlan id for untagged traffic, Description – Intel NetStructure 470 User Manual
Page 102
96
C
H
A
P
T
E
R
5
Intel® NetStructure™ 470T and 470F Switches User Guide
Configure VLAN ID for Untagged Traffic
Description
Use this screen to set the switch up to manage incoming packets that do not
contain IEEE 802.1Q VLAN tags or priority tagged traffic (packets with a
VID of zero). This is an ingress rule only; it does not apply to outbound
traffic.
Untagged traffic is normally assigned to VLAN 1 (the DEFAULT_VLAN),
which includes all ports on the switch. However, if you want to send
untagged traffic on a specific port other than the default VLAN, you can
assign a different PVID.
For example, if you set a port’s PVID to 5, all untagged traffic on the port
will be assigned to VID 5.
PVID: Identifies the VID of an existing 802.1Q VLAN where you want to
send untagged traffic.
APPLY: Activates the changes.
LOCATION
Main Menu
Configure a VLAN
Configure VLAN ID for
Untagged traffic (PVID)