Configuring a port – Intel NetStructure 470 User Manual
Page 38
32
C
H
A
P
T
E
R
4
Intel® NetStructure™ 470T and 470F Switches User Guide
Configuring a Port
You can use the Web Device Manager to enable or disable a port, and to
change its speed, duplex, flow control, and priority settings.
To change port settings
1
Click the Configure Device menu, and then click Port Settings. To
access the Port Settings for a port, click the port you want to configure
on the faceplate graphic.
2
In the boxes, click the options you want to change:
•
Port State lets you enable or disable the port.
•
Speed/Duplex lets you set port speed and duplex.
•
Flow Control lets you enable or disable flow control.
•
Priority Queue (802.1p) lets you set the switch priority queue for
packets sent or received on this port.
3
Click Submit.
NOTE
If you change the flow control or
IP settings, you must reboot the
switch before the new settings
can take effect.