Saving configuration changes and logging out – Intel NetStructure 470 User Manual
Page 54
48
C
H
A
P
T
E
R
4
Intel® NetStructure™ 470T and 470F Switches User Guide
5
In the File Name box, type the name of the firmware file.
6
Click Submit.
The switch automatically reboots.
The next time the switch reboots it downloads and installs the new firmware
during the boot process. If you want to view this process, you must use a
terminal program and connect to the switch through the serial port.
Saving Configuration Changes and
Logging Out
Each time you make configuration changes using the Web Device Manager,
the switch immediately uses the new settings. However, when you log out
of the Web Device Manager, you’ll be prompted to save the current
configuration settings.
If you do not save the new configuration settings to the switch’s flash
memory, the settings are lost upon the next switch reboot.
To save changes and log out
1
Click Log Out from the menu.
2
Click Save Now to save the current configuration settings. The Web
browser window closes and you are successfully logged off of the Web
Device Manager.
If you click Do Not Save, all current configuration settings are lost the
next time the switch is rebooted.