Intel NetStructure 470 - Manual (Page 126)

120
A P P E N D I X Intel® NetStructure™ 470T and 470F Switches User Guide
Save Configuration File
You can save the changes you make to the switch’s configuraton as a new
configuration file.
1 From the main menu, select Configure device, then select IP Settings.
2 Type the IP address of your switch. Press SUBMIT.
3 From the main menu, select Tools
Load Configuration File
1 From the main menu, select Configure device, then select IP Settings.
2 Type the IP address for the switch to which you want to load the file.
Press SUBMIT.
3 From the main menu select Configure management, then select Update
firmware and configuration files.
4 Set the Software update mode to Network, and in the TFTP server
address field, type the IP address of the TFTP server where the
configuration file resides.
5 Set Config file download to Enable.
6 Type the path and file name of the configuration file in the Config file
name field.
7 Press REBOOT TO START UPDATE to initiate the update process.