InSciTek Microsystems 9102 - Manual (Page 16)

635 Crosskeys Office Park • Fairport, NY 14450 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2004 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems. All other names may be trademarks or registered trademarks
of their respective owners.
12
If you’re already using the handset, you can:
•
Place the handset on the hook. When you are finished with the call, press
Speaker to hang up.
•
Place the handset on the desk. To switch back to using the handset, just press
Speaker.
NOTE: If you’re using a headset, you will use Speaker to activate it. You will not be able
to use the speakerphone while using a headset. Refer to How Do I Use a Headset.
Intercom
1. You can press a programmed DSS/BLF button for another user’s phone and you
will automatically be connected via the intercom.
OR
Press Intercom. Dial the extension you want to talk to hands-free.
2. The light on the Intercom button turns solid green.
3. Start talking and the person you called will hear you over the speaker.
4. To receive an Intercom message, simply start talking when the Intercom button is
lit green.
Press Intercom or Speaker to end the call.
Headset
1. Plug the cable for the headset into its receptacle.
2. Press Speaker. (You cannot use the speakerphone and headset at the same
time.)
3. When you are finished with the call, press Speaker to hang up.
You can also program a Button to activate the headset instead of using the Speaker
button. Your System Administrator can set it up for you.