InSciTek Microsystems 9102 - Manual (Page 24)

635 Crosskeys Office Park • Fairport, NY 14450 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2004 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems. All other names may be trademarks or registered trademarks
of their respective owners.
20
Check the current status
1. Select the softkey that corresponds to CONFIG on the screen.
2. Highlight Current Status/Info.
3. Press Select.
4. You can see the following information:
•
DHCP Lease Time (if DHCP is enabled)
•
Boot Server IP
•
Phone IP
•
Subnet IP
•
Gateway IP
•
Boot Configuration success or failure
•
MAC Address
•
Model Name
•
Software Version
•
LAN Connection Info
•
PC Connection status
Use the up and down arrow buttons to move through the list.
When finished, press the Softkey that corresponds to EXIT.
Check statistics
1. Select the softkey that corresponds to CONFIG on the screen.
2. Highlight Statistics.
3. Press Select.
4. You can see the following information:
•
Audio Packet Stats
•
RCV
•
XMT
•
Missed
•
Avg Jitter
•
Min Delay
•
Max Delay
•
SIP Call Stats
•
Incoming OK
•
Outgoing OK
•
Bad Address