InSciTek Microsystems 9102 - Manual (Page 25)

635 Crosskeys Office Park • Fairport, NY 14450 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2004 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems. All other names may be trademarks or registered trademarks
of their respective owners.
21
•
Refused Busy
Use the up and down arrow buttons to move through the list.
When finished, select the softkey that corresponds to EXIT.
Save changes to your settings
Normally, the user is prompted to save the changes they have made. However, they may
manually want to save the changes.
1. Select the softkey that corresponds to CONFIG on the screen.
2. Highlight Save Settings.
3. Press Select.
4. Select the Softkey that corresponds to YES to save any changes OR select NO
to cancel saving the changes.
5. Press the Exit button on the screen.
Reset the phone to its factory defaults
WARNING: Do not reset your phone to its factory defaults unless instructed by your
System Administrator.
1. Select the softkey that corresponds to CONFIG on the screen.
2. Highlight Set Factory Defaults.
3. Press Select.
4. Select the softkey that corresponds to YES to restore the factory defaults OR
select NO to keep the Configuration as is.
5. Phone automatically reboots.