Intel Ethernet Switch Boards - Manual (Page 17)

External connectors
System connectors
In
te
rn
al
c
on
ne
ct
or
s
GPIO
USB
COMs
IDE
FDC
LVDS
DVO
PC/104
PC/104-Plus
Features ePanel-mgx ePanel-C3
CPU AMD Geode ® SC1200 VIA ® Eden ESP
CPU Clock 266 MHz 300 MHz, 733 MHz, 1 GHz
Chipset integrated CLE266 / VT8235
DRAM 256 MByte SDRAM (max.) DDR RAM 1 GByte (max.)
DRAM socket 1x SO-DIMM, 144 pin 1x SO-DIMM, 200 pin
CompactFlash True I DE Mode Primary Channel
Boot Drive True I DE Mode Primary Channel
Boot Drive
Resolution XGA (max.) UXGA (max.)
Video Input Philips Videodecoder SAA7118 Philips Videodecoder SAA7118
Backlight Support standard 7 pin connector 12 V/500
mA dimming control voltage 0-5 V standard 7 pin connector 12 V/500
mA dimming control voltage 0-5 V
IDE Interface 1x EIDE (UDMA-33) 1x EIDE (UDMA-100)
Audio AMD ® AC97 VIA ® VT1616 (AC97) Line in /out
USB 3x 1.0 3x 2.0
Ethernet 10/100Base-T 10/100Base-T VIA ® VT6103
Graphics Controller integrated VIA ® CLE266 with integrated
VIA ® AGP (4x) Castelrock
Graphics Memory shared up to 4 MByte 16/32/64 MByte shared memory
MPEG2 HW decoder - 
Touch Controller supports 4/8 wire resistive
technology supports 4/ 5*/8 wire resistive
technology (5-wire optional)
Touch Matrix 8x8
PC CARD Adapter Typ II
Mini-PCI - 
Supply Voltage 8 / 28 V
Battery Interface (SMB) Smart battery charger onboard 3 A
max. charging current 18 V max
charging voltage power monitoring
by SMBus Smart battery charger onboard 1 A
max. charging current 18 V max
charging voltage power monitoring
by SMBus
Flat Panel Interface TTL / LVDS
Expansion I/O Adapters (for standard
connectors as USB, Mouse etc.) a.
video in/TV out I/O Adapters (for standard
connectors as USB, Mouse etc.) a.
video in/TV out (optional)
Common Features Keyboard, Mouse, 1x EPP, single
Floppy Interface, Dark Boot, I2C,
Watchdog, PC Card Adapter Typ II Keyboard, Mouse, 1x EPP, single
Floppy Interface, Dark Boot, I2C,
Watchdog, PC Card Adapter Typ II,
Mini-PCI
Cooling - passive / active (depends on
system design)
Power Consumption (typ.) 7 W/12 V estim. 16 W/12 V (@ 733 MHz)
Dimensions H x W 140 x 180 mm
RoHS compliant - 
Features EPIC/CE EPIC/PM
CPU Intel ® LV/ULV Celeron ® Intel ® Pentium ® M, Celeron ® M
CPU Clock 400/733 MHz 600 MHz up to 1.8 GHz
Front Side Bus 100/133 MHz 400 MHz
Cache L2: 256 kByte L2: up to 2 MByte
BIOS Phoenix ®
Chipset Intel ® 815 / ICH4 Intel ® 855GME / ICH4
DRAM up to 512 MByte SDRAM up to 2 GByte DDR
DRAM socket SDRAM-SODIMM DUAL DDR-RAM-SODIMM ECC
CompactFlash  
Audio 5.1 Sound, Jack-plugs (Line In/Out/Mic)
Hard disk EIDE (UMDA-133)
USB 6x USB 2.0 (4x ext, 2x int)
USB Boot/Legacy Support  
I/O Standards 2x Ethernet, PS/2 mouse and keyboard, LPT DSUB, FDD 2x 1.44/2.88
I/O Features 21x GPIO 8x GPIO
Graphics Controller Intel ® Graphics engine Intel ® Extreme Graphics 2
Graphics Memory 12 MByte VRAM up to 2x 32 MByte VRAM
Graphics CRT & DVO & LCD (JILI-LVDS)
Serial Channels 4x (1x RS232 DSUB, 3x int. RS232 with 1x as RS422/485)
Common Features Darkboot/Lanboot, Watchdog, System Monitoring
Special Features fanless at 400 MHz for
enhanced reliability DUAL Independent panel &
Enhanced SpeedStep
Power Management APM 1.2 / ACPI 2.0
Cooling 400 MHz Passive / 733 MHz Active Active
Power connector ATX or 5 V (option)
Dimensions H x W 115 x 165 mm
I/O Expansion Type PC/104-Plus (ISA & PCI)
Operating Temperature 0 to 60°C
RoHS compliant  
5.1 Sound
USB
LAN
CRT
COM
LPT
Kbd./Mouse
CompactFlash
new
32 33

ePanel
The SBC for mobile panel PCs
Do you need a low profile single board com-
puter to be mounted directly behind the
Flatpanel?
ePanel-mgx is a complete, ultra-low-profile
assembled PC with a maximum height of 7 mm,
based on SC1200@266 MHz CPU. A wide range
of software is available for this proven x86
platform. In addition to very low power con-
sumption (<7 W), this system also offers a
wide variety of interfaces, which makes it an
ideal embedded PC.
ePanel-C3 is the next stage in the develop-
ment of the unique Flatpanel-PC Concept in an
ultra-flat formfactor. It is based on VIA Eden
CPUs from 300 MHz up to 1 GHz and offers very
low power consumption and a wide variety of
interfaces. Further attractive features include
USB 2.0 support, 64 Mbyte graphics memory
and an MPEG2-hardware decoder for DVD appli-
cations. Supported Operating Systems:
Windows XP Embedded, Windows CE, LINUX.

Low profile

Low power consumption

MPEG2 hardware decoder (C3)
These boards work straight out of the box and
have instant availability and almost zero time to
market. All interfaces and most functionalities
are onboard and built in. Standard accessories
are likewise off-the-shelf and permit a fast
system setup. Other modules, on the other hand,
always need a fully customized backplane that
demands detailed R&D knowledge and engin-
eering time, so its time to market is longer and
R&D costs are higher. With an SBC like the
ePanel, systems can be designed within a short
period and built with little additional engin-
eering efforts.

EPIC
 I/O Adapter video in/out
EPIC / ePanel
What happens when PC/104 falls in
love with a motherboard?
EPIC is born - with the best of
both worlds:

From fanless low power up to
Intel ® Pentium ® M.

With PC/104 ISA and PC/104-Plus PCI
extension for limitless I/O use.

Max. ATX alike featureset, max. cable
reduction - lead-free future provided for.
 I/O Adapter standard
connectors
The EPIC family features
The following interfaces stay the same - throughout the whole EPIC FAMILY!