Intel Ethernet Switch Boards - Manual (Page 9)

Features ETX-PM ETX-P3Tx ETX-P3T ETX-P3m ETX-VE ETX-VEGA ETX-e.lite
CPU Intel ® Pentium ® M,
Intel ® Celeron ® M
Intel ® Celeron ® Processor
& ATI ® Graphics
Intel ® Celeron ® Processor Mobile Intel ® Pentium ®
III Processor-M, Intel ®
Celeron ® Processor ®
VIA ® Eden ESP3000,
ESP4000, ESP7000,
C3-800, ESP10000
STPC ® VEGA STPC ® ELITE
CPU Clock 600 MHz up to 1.8 GHz 733 MHz, 1 GHz 400 MHz, 733 MHz,
1 GHz 400, 650, 800, 933 MHz 300, 400, 700, 800
MHz, 1 GHz 200 MHz 100 MHz
Cache 1 MByte (L2 on chip)
0 MByte up to 2 MByte (L2 on chip) 256 kByte (L2 on chip) 256 kByte (L2 on chip) ETX-P3m: 512/256
kByte (L2 on chip) 64 kByte (L2 on chip) 16 kByte (L1) 8 kByte (L1)
Chipset Intel ® 855 GME Intel ® 815 Intel ® 815 VIA ® Twister ™ T VIA ® Twister ™ T integrated integrated
Bus Speed 400 MHz 100 MHz 100 MHz 133 MHz 133 MHz 200 MHz -
DRAM 1024 MByte (DDR-SDRAM) 512 MByte (SDRAM) 512 MByte (SDRAM) 1024 MByte (SDRAM) 512 MByte (SDRAM) 256 MByte (SDRAM) 16/32/64 MByte SDRAM
onboard (soldered)
DRAM socket 1x S0-DIMM, 200 pin 1x S0-DIMM, 144 pin 1x S0-DIMM, 144 pin 1x S0-DIMM, 144 pin 1x S0-DIMM, 144 pin 1x S0-DIMM, 144 pin -
SM Bus Support      - -
Flash Disk - - - - n.a. CompactFlash Socket CompactFlash Socket
USB 4 ports USB 2.0 4 ports USB 2.0 4 ports USB 2.0 4 ports USB 1.1 4 ports USB 1.1 2 ports USB 1.1,
4 ports USB 2.0 optional 2 ports USB 1.1
USB Boot/Legacy Support  /  /  /  /  /  /  /
Ethernet 10/100Base-Tx 10/100Base-Tx 10/100Base-Tx 10/100Base-Tx 10/100Base-Tx 10/100Base-Tx 10Base-Tx
Ethernet Controller Intel ® 82562 Intel ® 82562 Intel ® 82562
(Davicom opt.)
Intel ® 82551ER Intel ® 82551ER Davicom DM9102A/D Davicom DM9102AT
Audio Controller VIA ® VT1612A AC97 VIA ® VT1612A AC97 VIA ® VT1612A AC97 VIA ® VT1612A AC97 VIA ® VT1612A AC97 PCI C-Media CMI8738 (optional)
Graphics Controller Intel ® Extreme Graphics2 ATI ® Radeon Mobility M6 Intel ® Extreme Graphics
(integrated)
VT8603C (S3Savage 4) VT8603C (S3 Savage 4) Silicon Motion Lynx 3DM -
Graphics Memory up to 32 MByte UMA up to 32 MByte UMA up to 32 MByte UMA up to 32 MByte UMA up to 32 MByte UMA up to 2 MByte Video
Memory -
Flat Panel Interface JILI Interface (LVDS) JILI Interface (LVDS) JILI Interface (LVDS) JILI Interface (LVDS) JILI Interface (LVDS) JILI Interface (LVDS) or
JIDI (digital) Interface -
Power Management ACPI, APM 1.2 ACPI, APM 1.2 ACPI, APM 1.2 ACPI, APM 1.2 ACPI, APM 1.2 APM 1.2 APM 1.2
Power Consumption (typ.) 12.5 W @ 1.1 GHz tbd. 14.5 W @ 733 MHz 12.5 W @ 800 MHz,
22 W @ 1.2 GHz 10 W @ 400 MHz 5 W @ 200 MHz 4 W @ 100 MHz
RoHS compliant       
Application board-to-external connection
ETX-to-application board connection
ETX module Application board
Expansion
Storage
Control
Flat panel
CRT monitor
LAN / WAN
Optional
audio amp.
Speaker /
microphone
Standard I/O
PCI bus
ISA bus
IDE 1/2
12C. SMB
USB 1-4
LPT or floppy
COM 1 / 2
Mouse/keyboard
LAN
LVDS
Analog VGA
Analog audio Audio
DRAM
(SODIMM)
Video
processor
Ethernet
X86 core
Chipset
CPU
(MGX,
VIA Eden,
Pentium,
Pentium III)
PC/AT I/O
Available
Q4/2005
Available
Q4/2005
16 17

ETX
– The Standard for Custom Designs
The ETX Solution
ETX Computer-On-Modules are the perfect solution for
embedded applications that require full PC functionality
and high performance CPUs. They support x86 CPUs from
100 MHz to 1.8 GHz and offer a full complement of PC/AT
I/O such as keyboard, serial, parallel and IDE interfaces.
The full-featured ETX series also includes onboard USB,
Ethernet, graphics and sound. ETX modules are installed
on the application-specific baseboard much like an inte-
grated circuit component, in a hostsite comprised of four
low profile, surface mount connectors. The baseboard provides the drive electronics and
physical connectors for the I/O originating on the ETX.
Additional I/O and application-specific sub systems may
be integrated on the baseboard designed as PCI or ISA
bus peripherals.
For more information download the Design Guide at
www.kontron.com/techlib/whitepapers/
ETXDesignGuide116.pdf

The Thermal Concept
ETX Heatspreader provides:
 Identical mechanical size
- all ETX modules fit in the
same system.
 The only surface that needs
cooling is the top of the
heatspreader.

ETX
Computer-On-Modules / ETX

ETX Starter-KIT
 Complete Starterkit for
immediate evaluation
purposes.
 Includes all required hard-
and software components for a
quick start.
 Choose your Module
for the starterkit.