Intel Ethernet Switch Boards - Manual (Page 44)

Features 104 121 150 170 190 210
Display 10.4" 12.1" 15" 17" 19" 21"
Max. Cable Length (Single Cable) 30 m 30 m 30 m 20 m 20 m 15 m
Resolution 640x480
@60 Hz 800x600
@60 Hz 1024x768
@60 Hz 1280x1024
@60 Hz 1280x1024
@60 Hz 1600x1280
@60 Hz
Power Supply 24 VDC
EMC US: FCC47 CFR PART 15; Class A level CE: EN61000-6-2; EN55022/A (CISPR22);
Approvals CE, FCC, cULus
Protection Class IP 20
Altitude 0perating: 10,000 ft (3,048m) - Storage: 15,000 ft (4,622m)
Shock DIN EN 60068-2-27 Operating: 15G, 11ms duration - Storage: 50G, 11ms duration (half-sinus)
Vibration DIN EN 60068-2-6 Operating: 10-500Hz: 1G / 3 axis - Storage: 10-500Hz: 2G / 3 axis
Temperature/Humidity Operating: 0°C to +50°C / 5 to 95% non condensing;
Storage: -25°C to +70°C / 5 to 95% non condensing
MTBF > 180 000 h
RoHS Compliant 
PC Patch Cable
DVI/USB
Long Distance
Transmitter (LDT)
Long Distance
Cable
Long Distance
Receiver (LDR)
Patch Cable
DVI/USB
Monitor
any with DVI/USB
e.g.
SC75 0,25 / 2,0 / 5,0 m LDT-box (ext.)
(H x W x D:
166 x 200 x 40 mm)
LDT-slotPCI
LDT-slotISA
LDT-cPCI LDC-15: 15 m
LDC-20: 20 m
LDC-25: 25 m
LDC-30: 30 m LDR-box (ext.)
(H x W x D:
182 x 223 x 41 mm) 0,25 / 2,0 / 5,0 m any with DVI/USB
e.g.
HMI Touch Panel
Touch Panels
p. 81
new
82 83

HMI
Long Distance Monitoring
Long Distance Monitoring

Detached HMI

Single cable solution

10" - 15" TFT up to 30 m distance
17" - 19" TFT up to 20 m distance
21" TFT up to 15 m distance

Standard interfaces (USB/DVI)

7x USB HUB
Detached HMI
In some applications, the installation of a Panel PC at an
activity location is diffi cult because of limited space or
inappropriate because the display is required at a distance
from the actual equipment. For these special requirements,
Kontron has developed a break through solution that can
bridge distances of up to 30 meters for any IPC and TFT dis-
play with DVI and USB interfaces.
Standard interfaces
This Long Distance Monitoring is implemented by Kontron
over a DVI and a USB interface and a Long Distance Trans-
mitter, which is either installed in any computer requiring
only one slot or is placed separately in a corresponding
Long Distance Transmitter box (LDT-box). A corresponding
Long Distance Receiver box is placed next to the TFT dis-
play, connected between the cable and the monitor. The
connection between the Long Distance Transmitter and
Receiver is just a single cable.
Single cable solution
In order to meet the requirements of industrial automation
technology, this single cable supplies the monitor’s power
along with the image and USB information. In addition, the
connection of the touch panel, which is frequently reques-
ted in the automation fi eld, is implemented in the same
cable. Despite this performance package, the cable is highly
fl exible.
USB-HUB
10" to 15" TFT monitors can be used at a maximum dis-
tance of 30 meters with these „Long Lines”, 17" to 19"
displays up to 20 meters and 21" TFT displays can be
placed up to 15 meters away. Upgrading the Long Distance
Receivers to a USB hub furthermore enables the connection
of up to 7 USB 1.1 compatible devices with up to 12 MBit/s
full speed transfer rate. From keyboard and mouse to prin-
ters, hard drives and DVD drives, everything that the user
requires in daily operation - for installation or maintenance
(such as for software updates) - can thus be connected as
plug-and-play.

Confi gurations