IBM Oce TDS800 - Manual (Page 55)

Using the Océ TDS800 to Copy 55
Perform basic copy jobs
On the Océ TDS800 scanner operator panel you perform a number of basic
tasks. These include:
■ Make copies
■ Select the required media
■
Select the input mode
■ Specify the zoom factor
■ Define settings for the next original
■ Account logging
■
Using the manual feed for copy jobs
■
Define delivery of copies
■ Stop a job
■ Interrupt a job
■ Stamping
Make copies
1 Place your original face-up, left aligned along the original guide. Keep the
legend at your left hand side.
Note: When you feed the original, keep it in place until it is transported
(about 1 cm) into the machine.
[14] Insert the original
2 Specify the number of copies using the numeric keys.
3 Specify the ‘Paper series’ on the ‘Sheet’ card in the ‘Original’ section.
4 Specify the desired media on the operator panel.