GE 45246 GE Wireless Color Camera with AV Receiver User Manual

Page 12

Advertising
background image

12

1. Plug the AC adapter for the Wireless Receiver

(labeled ‘Receiver’) into the power jack (marked

‘DC 9V’ on the back of the receiver), then into an

AC outlet. Select the desired channel on the back

of the receiver

(see Receiver Channel Selection).

2. After selecting the channel for the camera

(see

Channel Selection). Plug the AC adapter for the

camera (labeled ‘Camera’) into cable coming from

the camera. Plug the AC adapter into an AC outlet.

3. Locate the AV cable. It has a 3.5mm male plug

at one end, and two RCA plugs at the other end.

Connect the 3.5mm male to the rear jack of the

receiver, marked ‘A/V Out’. Connect the other

ends (white/yellow) to your television’s A/V inputs.

Match the yellow plug to the yellow VIDEO IN jack

and the white plug to the white AUDIO IN jack.

4. Rotate the antenna, on the receiver, to a vertical

position. Place the receiver either on top of or

near to your TV monitor.

5. Set your TV to monitor the VIDEO INPUT

designated for the Receiver.

6. Place camera near desired location and check

quality of transmitted image on the monitor.

Advertising