GE 45246 GE Wireless Color Camera with AV Receiver - Manual (Page 14)

14
It turns on/off the high-powered Infrared (IR) LEDs
on the front of the camera. These LEDs provide
artificial light that allows the camera to see in the
dark. Long Range Night Vision will appear as a
Black and White image. When the image sensor
detects enough light, color will return to the images.
AUDIO DETECTION AND NOTIFICATION FEATURE
This feature allows the Receiver to emit an audio
alert whenever sound is detected within a
monitored area. To activate the detection feature
press and release the button located on the front
of the receiver. When the camera detects a sound,
the receiver will sound an alert and a notification
light will flash. The sensitivity for the level of audio
detection (when the receiver will sound an alert)
can be adjusted with the sensitivity control located
at the back of the receiver. Set the sensitivity to
the highest level and press the button on the front.
Adjust the sensitivity control to desired level.
CAMERA INSTALLATION
Wall Mount or Ceiling Mount — you will need:
- Drill
- 3/8" Drill bit (if running power cable thru wall
or ceiling)
- 1/8" drill bit (for drilling screw pilot holes if mounting,
into wood or non-brick material)