JVC KD-AHD39 - Manual (Page 21)

ENGLISH
21
!
Enter the Bluetooth menu.
⁄
Make a call or settings using the
Bluetooth menu.
See pages 22 and 24.
• You can adjust the microphone volume level (see page
24).
• You can adjust the volume level for “BT-PHONE” without
affecting the volume level for the other sources.
When the sound is stopped or interrupted while using a
Bluetooth device, turn off, then turn on the unit.
• If the sound is not yet restored, connect the device again
(see page 20).
When a call comes in...
The source is automatically changed to “BT-PHONE.”
When “AUTO ANSWER” is set to “ON” (see page 24),
the unit answers the incoming calls automatically.
• When “AUTO ANSWER” is set to “OFF,” press any button
(except the button) to answer the incoming
call.
To end the call or reject an incoming call, hold any
button (except the
button).
When a Text Message comes in...
If the cellular phone is compatible with Text Message and
“MSG INFO” is set to “AUTO” (see page 24), the unit rings
and “RCV MSG” appears on the display to inform you of the
arrival of the message.
• You cannot edit or send a message through the unit.
Deleting a registered device
1
2
Select the registered device you want to
delete then enter the Bluetooth menu.
3
Select “DELETE” then “YES.”
To check the clock time
Using the Bluetooth cellular
phone
~
Ÿ
Establish a connection with a device (see
page 20).
Clock
Ô BT-PHONE/BT-AUDIO
EN_KDHDR30AHD39_f.indb 21 EN_KDHDR30AHD39_f.indb 21 07.11.16 6:50:12 PM 07.11.16 6:50:12 PM