Multichannel ds3 pic – Juniper Networks M20 User Manual

Page 26

Advertising
background image

Multichannel DS3 PIC

■

JUNOS 5.1 and later

Software release

■

Two DS3 ports

■

Power requirement: 0.31 A @ 48 V (14.9 W)

■

Supports up to 128 logical customer channels per DS3 port

Description

■

Support for NxT1 by interoperating with the Link Services and Multilink Services PICs,
using MLPPP and MLFR protocols

■

Onboard DSU functionality

Hardware features

■

Support for four data-link connection identifiers (DLCIs) per logical customer channel

■

DS3 alarm and event counting

■

DS3 alarm and event detection

■

DS3 diagnostics and loopback control

■

DS3 framing: M13, C-bit

■

T1 framing: super frame (SF) and extended super frame (ESF)

■

Encapsulations:

■

High-Level Data Link Control (HDLC)

■

Frame Relay

■

Circuit cross-connect (CCC)

■

Point-to-Point Protocol (PPP)

Software features

■

Custom 10 ft/3.05 m posilock to BNC male cable, separate Rx and Tx

Cables and connectors

One tricolor per port:

■

Off—Not enabled

■

Green—Online with no alarms or failures

■

Amber—Online with alarms for remote failures

■

Red—Active with a local alarm; router has detected a failure

LEDs

26

■

Multichannel DS3 PIC

M20 Internet Router PIC Guide: End-of-Life PICs

Advertising