Juniper Networks M20 - Manual (Page 4)

Adaptive Services PIC
■ JUNOS 6.0 and later Software release
■ Supports tunnel services. This feature is included with the PIC and does not require an
individual license.
■ Individual licenses must be purchased for additional services such as Network Address
Translation (NAT), stateful firewall, intrusion detection services (IDS), IPSec, J-Flow
accounting, and voice services. For information about which services are supported by
PIC and platform type, see the JUNOS Services Interfaces Configuration Guide.
■ Power requirement: 0.4 A @ 48 V (19 W)
Description
■ Throughput speeds up to 800 Mbps of unidirectional traffic or 400 Mbps of bidirectional
traffic, determined by packet size
■ Active monitoring on any interface up to 250,000 packets per second
■ Support for MTUs up to 9192 bytes for Gigabit Ethernet and SONET interfaces
Hardware features
For a list of the software features available for services PICs, see the JUNOS Services Interfaces
Configuration Guide.
Depending on your JUNOS release and individual licenses, software features for this PIC can
include:
■ Stateful firewall with packet inspection
■ Detects SYN attacks, ICMP and UDP floods, and ping of death attacks
■ NAT for IP addresses
■ Port Address Translation (PAT) for port numbers
■ J-Flow accounting exports cflowd version 5 and version 8 records
■ Tunnel services:
■ IP-IP unicast tunneling
■ GRE unicast tunneling—supports GRE fragmentation
■ PIM sparse mode unicast tunneling
■ Virtual loopback tunnel interface for VRF table lookup
■ IPSec encryption
■ Voice services:
■ Compressed Real-Time Transport Protocol (CRTP)
■ Compressed User Datagram Protocol (CUDP)
■ Encapsulations:
■ High-Level Data Link Control (HDLC)
■ Point-to-Point Protocol (PPP)
Software features
4 ■ Adaptive Services PIC
M20 Internet Router PIC Guide: End-of-Life PICs